BOSS - 支援 - VE-500 - 更新&驅動程式 - VE-500 System Program (Ver.1.05)

VE-500 System Program (Ver.1.05)

How to tell the version

Please check the version of the system working on your VE-500 before downloading the archive file.

Hold down the [ EXIT ] button and insert the AC adaptor's connection plug into the DC IN jack. The power is turned on.
* Press and hold the [ EXIT ] button until "BOSS" appears on the display.
The display indicates the current system version.
Disconnect the plug from the DC IN jack.

* Don't perform the update if the product is already up-to-date.

Update history
[ Ver.1.05 ] JAN 2019
Bug Fix
The following bug was fixed.

When using VE-500 Editor, some parameters are not set correctly.

[ Ver.1.04 ] NOV 2018
Bug Fix
The following bug was fixed.

The system sometimes fails to function correctly when connected to an external MIDI device that does not send active sensing messages.

What you will need to update your VE-500

VE-500
USB cable (It must be compatible with USB 2.0 Hi-Speed.)
A computer with a USB 2.0 connector ( Windows, Mac )
AC Adaptor ( PSA Series )

Caution when performing the update

No saved user data is lost when this update is carried out correctly, but to safeguard against unexpected accidents, we recommend saving user data to VE-500 Editor before applying the update.
Never apply this update data to any product other than the VE-500. This update data may destroy the data or system program of other products.
Be sure to power the unit using the AC adaptor. Executing the update while running on only battery power may cause the update to fail and result in incorrect operation if the batteries go dead before the update finishes.
Never power-off your VE-500 while the update is in progress!
If a power failure or similar accident occurs during the update process, the VE-500 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded " ve500_sys_v105.zip " file on your computer to get the update files in the "ve500_sys_v105" folder.

Procedure for the update

NOTE
* You must not do the following operations on restoring. Doing so might make your computer freeze, or might result in the loss of all of the VE-500's data.

Turn off the VE-500's power.
Disconnect the USB cable.
Allow your computer to enter suspend (standby) or hibernate mode, restart it, or shut it down.

Hold down the [ EFFECT EDIT ] and [ ENTER ] buttons and insert the AC adaptor's connection plug into the DC IN jack.
Then it will turn on and the display will indicate the "CONNECT USB CABLE".
Use a commercially available USB cable to connect the VE-500's MICRO USB port to your computer's USB connector.
Open the "BOSS_VE500" drive.

[ Windows users ]
Within My Computer (or Computer), open "BOSS_VE500" (or Removable Disk).
[ macOS / OS X users ]
On the desktop, open the "BOSS_VE500" icon.
Copy (drag and drop) the "VE500ROM.BIN" and the "ROMINFO.TXT" in the "ve500_sys_v105" folder into the root directory of the "BOSS_VE500" drive.
After the copy has been completed, unmount or remove the drive on your computer.
With Windows

Right-click on the "BOSS_VE500" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."

With macOS / OS X

Drag the "BOSS_VE500" icon to the Trush icon in the Dock.
Disconnect the USB cable.
The message "EDIT:EXECUTE" will appear on the display.
Press [ EFFECT EDIT ] button to start the update process.
While the update is in progress, the message "UPDATING..." is shown on the display.
The message "COMPLETED" will appear on the display when the update process completes.
When the display changes to the message "COMPLETED" and you have confirmed that the update has finished, disconnect the plug from the DC IN jack to turn off the power.
Please verify the version number "1.05" with the procedure described in "How to tell the version" part of this document.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

VE-500 System Program (Ver.1.05)

支援

Quick Links