BOSS - 支援 - SY-200 - 更新&驅動程式 - SY-200 System Program ( Ver.1.03 )

SY-200 System Program ( Ver.1.03 )

HOW TO KNOW THE VERSION

Before you start, check the system program version of your SY-200.

Hold down the [ MENU ] button and insert a plug into the INPUT jack.
The power comes on and the version is displayed on the Display.
If this shows the latest version (version 1.03 or later), there's no need to update your SY-200.
After verifying the displayed version, switch off the power.

UPDATE HISTORY

[ Ver.1.03 ] SEP 2024

[ Bug Fix ]
The following bug was fixed.

The contents of the memory number are not correct when the memory change is performed consecutively.

[ Ver.1.02 ] DEC 2021

[ Bug Fix ]
The following bug was fixed.

Parameter operations made by a MIDI control change message simultaneously with a memory switch switch to MEMORY 005 to 127 fail to be applied.

WHAT YOU WILL NEED TO UPDATE YOUR SY-200

SY-200
USB cable
* Provide a cable suitable for connection to the computer you're using.
A personal computer which can run the following SMF players ("UpdSMF")
- SMF Player for Windows
- SMF Player for macOS
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0

CAUTION WHEN PERFORMING THE UPDATE

If you update on the normal mode of SY-200 against the correct procedrue, this update data may destroy the system program.
Never power-off your SY-200 while the update is in progress!
If a power failure or similar accident occurs during the update process, the SY-200 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "sy200_sys_v103.zip" file on your computer to get the update files in the "sy200_sys_v103" folder.

PROCEDURE FOR THE UPDATE

Follow the steps below to install the system program in the SY-200.
* Never power-off the SY-200 while the update is in progress.

Turn down all knobs all the way.
Connect the SY-200 to the computer.
Hold down the [MEMORY] knob on the SY-200 and insert a plug into the INPUT jack.
The SY-200's power is turned on, and the message "UPDATER USB" appears on the display.
On the computer, run UpdSMF.
Set MIDI Out Device to the SY-200.
Click [ Path ] (click [ Select... ] for Mac) on "UpdSMF" and specify the location where the update files from SMF Path (SMF Folder for Mac). Then, click the [ OK ] button.
Click [ Scan SMF ] (unnecessary for Mac) to check that the update file is displayed in the file list.
Click Send.
Sending of the update program starts.
* It will take about 25 minutes to update. Be sure never to switch off the power before the operation finishes.

When the message "OK" appears on the display, the update has finished.
Detach the plug from the INPUT jack and turn off the power.
Please verify the version number "1.03" with the procedure described in "HOW TO KNOW THE VERSION" part of this document.
* If the update fails, redo the procedure from step 1.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

SY-200 System Program ( Ver.1.03 )

支援

Quick Links