BOSS - 支援 - SY-1000 - 更新&驅動程式 - BOSS TONE STUDIO for SY-1000 Ver.1.0.1 for Windows

BOSS TONE STUDIO for SY-1000 Ver.1.0.1 for Windows

Please refer to the "Using BOSS TONE STUDIO for SY-1000" for detailed information in the [ Owner's Manuals ].

UPDATE HISTORY

[ Ver.1.0.1 ] JAN 2020
Bug Fixes
The following bugs were fixed.

When ASSIGN TARGET has been edited on the SY-1000, the MIN and MAX values in the ASSIGN list in BOSS TONE STUDIO sometimes show incorrect values.
When ASSIGN TARGET has been edited on the SY-1000, the ASSIGN Detail View window in BOSS TONE STUDIO sometimes disappears.
When a factory reset is carried out on the SY-1000, PATCH LIST in BOSS TONE STUDIO sometimes fails to be updated automatically.
After the screen has been switched in BOSS TONE STUDIO, the [ DYNAMIC SYNTH - SEQ : SEQ LENGTH ] value sometimes fails to be updated correctly.

DOWNLOAD AND EXPAND THE ARCHIVE FILE

Download the file named "bts_sy1000_w101.zip".
The downloaded file is an archive file in zip format.
Right-click to select Extract All, and then follow the instructions.

HOW TO INSTALL

Going into the bts_sy1000_w101 folder created by expanding bts_sy1000_w101.zip and double-clicking BOSS TONE STUDIO for SY-1000 Setup.exe starts installation.
Thereafter, follow the on-screen installation instructions to proceed with installation.
When the "The installation was successful" message appears, click [Close] to finish.

STARTING THE APPLICATION

Connect SY-1000 and computer with USB cable.
Turn on SY-1000.
From the computer's "Start" menu, select "All Programs" -> "BOSS TONE STUDIO for SY-1000" -> "BOSS TONE STUDIO for SY-1000."
Selection screen of connecting device will appear for the first time you run the software. (After the second time running, the device will be chosen automatically.)
Select SY-1000 and click [ OK ].

* The device can be changed from the SETTING.

* After starting the application, if connecting BOSS TONE STUDIO for SY-1000 and the SY-1000 is not possible, then in Windows 10, set "Allow apps to access your microphone" to "On."

Click [Start], then [Settings].
Click [Privacy].
Click [Microphone] on the left side.
The microphone setting is displayed.
To change the setting, move the "Allow apps to access your microphone" switch to "On."
Close the window and quit Settings.

SYSTEM REQUIREMENTS

Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1

* Internet connectivity is required for using functions of TONE CENTRAL. (Please note that you might be charged for packet fee depends on your connectivity service.)
* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

BOSS TONE STUDIO for SY-1000 Ver.1.0.1 for Windows

支援

Quick Links