BOSS - 支援 - RC-505mkII - 更新&驅動程式 - RC-505mkII System Program ( Ver.1.21 )

RC-505mkII System Program ( Ver.1.21 )

HOW TO TELL THE VERSION

Please check the version of the system working on your RC-505mkII before downloading the archive file.

Hold down the [ MENU ] button , and push [ POWER ] switch. Then it will turn on.
The display indicates the current system version.
Press the [ POWER ] switch to turn off the power.

UPDATE HISTORY

[ Ver.1.21 ] SEP 2022

Bug Fixes

Fixed an issue where the recording states of Single Mode tracks wouldn't switch correctly with Loop Sync set to Measure.
Fixed an issue where the playback tempo may change when Single Mode track is overdubbed with Loop Sync set to Measure.
Fixed an issue where the Octave effect's mode and level parameters were not saved correctly.
Fixed an issue where noise might occur after recording a very short loop phrase.
Fixed an issue where the recording level might be improperly reduced with some track input settings.
Fixed an issue where Input FX would not operate with some track input settings.

[ Ver.1.20 ] AUG 2022

Additional Functions

Expanded Loop Sync Options
There are now three options to control record/play behavior when Loop Sync is on and another track is playing. These provide added flexibility when using Multi Mode or combinations of tracks assigned to Multi Mode and Single Mode.
- IMMEDIATE—Record/play operation starts immediately. During recording, the length is set in measure units.
- MEASURE—Record/play operation starts at the beginning of the next measure. During recording, the length is set in measure units.
- LOOP LENGTH—Record/play starts at the beginning of a measure within the current loop length. (This was the default behavior prior to Version 1.2.)
Expanded Control Functions (CTL FUNC)
- Additional ALL START/STOP options that immediately start/stop all tracks, overriding START and STOP MODE settings in each track.
- Additional TRK1-5 PLAY/STOP option that controls only play and stop.
- Additional ALL CLEAR option assignable to hold.
- Additional MEMORY INC/DEC and CURRENT TRACK INC/DEC options for controlling increment and decrement with push and hold operations of a single footswitch.
Expanded Slicer Effect Parameters
- Compressor function added to Pattern Slicer and Step Slicer effects.

Bug Fixes

Fixed an issue that could cause a freeze and/or system error message when connected via MIDI.
Fixed an issue where the INTRO REC function might not work correctly when using certain rhythm patterns.

[ Ver.1.12 ] APR 2022

Bug Fixes

Fixed a noise issue that could occur when the Rec Quantize function was turned off.
Fixed an issue with setting the Carrier function for the Vocoder effect (Input FX).
Fixed an issue with setting the Shift function for the Beat Shift effect (Track FX).
Fixed an issue where the Input FX/Track FX type might not be displayed correctly on the play screen.

[ Ver.1.10 ] MAR 2022

Additional Functions

Expanded Effects—Effect algorithms and parameters from legacy RC products have been added to a number of effect types, allowing users to reproduce favorite settings from previous units. This includes changes to Ring Mod, Slow Gear, Transpose, Pitch Bend, Octave, Roll, and other effects.
Step Rate—A Step Rate parameter has been added to the Filter, Phaser, Flanger, Isolator, and Auto Pan effects, making it easier to create interesting rhythmic effects.
Mic Level Quick Control—In addition to other input and output levels, the microphone level can now be adjusted while performing using a panel knob assignment.
Vocoder Enhancement—A Carrier Thru function has been added to the Vocoder effect, allowing users to mute the dry sound for increased clarity.
Input Thru—An assignable Input Thru function has been added to quickly mute or unmute the input signal while performing.

Bug Fixes

Auto Rec response and function improvements.
Fixed a noise issue that could occur when Rec Quantize was turned off.
Fixed Sync Setting issues that could cause audio stretching and glitching problems regardless of the setting.
Fixed audio record/playback problems that could occur when using rhythm intros.
Fixed a problem where control function (CTL FUNC) assignments might not work correctly when the system preference was set to Memory.
Expanded the sensitivity range of the noise suppressors on the input channels.
Fixed an issue where the track playback volume could vary when the stop mode was set to Fade Out.
Fixed issues that would cause a system error message to be displayed.

[ Ver.1.04 ] NOV 2021

Bug Fixes
The following bugs have been fixed.

Noise is sometimes recorded in overdubbing during reverse playback.
Some parameters sometimes fail to function correctly.
Some effects sometimes fail to synchronize with loops or tempos.

WHAT YOU WILL NEED TO UPDATE YOUR RC-505mkII

RC-505mkII
USB cable
* The update is carried out with the unit and the computer connected via USB.
* Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0.

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the RC-505mkII. This update data may destroy the data or system program of other products.
Never power-off your RC-505mkII while the update is in progress!
If a power failure or similar accident occurs during the update process, the RC-505mkII won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "rc505mk2_sys_v121.zip" file on your computer to get the "rc505mk2_sys_v121" folder.
Please make sure you have unzipped the downloaded update file.

PROCEDURE FOR THE UPDATE

Caution

You must not rename the extracted file.
Never turn off the RC-505mkII's power while the update is in progress. Otherwise the system program or the RC-505mkII itself may be destroyed.

Please install the extracted system program file into your RC-505mkII according to the following procedure.

Hold down the [ EXIT ] button, and push [ POWER ] switch. Then it will turn on.
After a short interval, the message "PREPARING..." appears on the display.
Connect the computer by a USB cable.
Once connected, the message "CONNECTED." appears on the display.
A "RC-505MK2" icon (drive) appears on the computer.
Open the "RC-505MK2" icon.
Copy (drag and drop) all the files included in the "rc505mk2_sys_v121" folder into the "RC-505MK2" icon.
After the copy is complete, eject the "RC-505mkII" icon(drive) from the computer.
[ With Windows computer ]
Right-click on the "RC-505MK2" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
[ With Mac computer ]
Drag the "RC-505MK2" icon to the Trush icon in the Dock.
The message "UPDATE ?" appears on the display.
Press [ENTER] to execute the update.
The message "WRITING..." appears on the display.
When the update is complete, the message "COMPLETE" appears on the display.
Then push [ POWER ] switch to turn off the power.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RC-505mkII System Program ( Ver.1.21 )

支援

Quick Links