BOSS - 支援 - RC-500 - 更新&驅動程式 - RC-500 System Program ( Ver.1.10 )

RC-500 System Program ( Ver.1.10 )

HOW TO KNOW THE VERSION

Before you start, check the system program version of your RC-500.

Hold down the [ MENU ] button , and connect a plug to the OUTPUT A/MONO jack. Then it will turn on.
* Press and hold the [ MENU ] button until "RC-500" appears on the display.
The display indicates the current system version.
Disconnect the plug from the OUTPUT A/MONO jack.

UPDATE HISTORY

[ Ver.1.10 ] DEC 2023

Additional Functions

The tempo calculation method has changed when recording with no timing reference (rhythm/click off).
When the first track is recorded, the tempo is calculated and adjusted based on the memory's current tempo setting. This provides a more accurate tempo and measure calculation, eliminating unintentional half-time or double-time results.

Bug Fixes
The following bugs were fixed.

Fixed an issue where the rhythm pattern specified for an ASSIGN target may not work correctly.
Fixed an issue where the memory’s tempo is not set correctly when importing WAV files from BOSS Tone Studio.
Fixed several issues that could cause a freeze and/or system error message.

[ Ver.1.04 ] JUL 2021

Bug Fixes
The following bugs were fixed.

When importing WAV files via USB connection, time stretching may be applied to the output audio.
The stability of operation was improved.

[ Ver.1.02 ] OCT 2020

The stability of operation was improved.

WHAT YOU WILL NEED TO UPDATE YOUR RC-500

RC-500
USB cable
* The update is carried out with the unit and the computer connected via USB.
Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0.
AC Adaptor ( PSA Series : optional)

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the RC-500. This update data may destroy the data or system program of other products.
Never power-off your RC-500 while the update is in progress!
If a power failure or similar accident occurs during the update process, the RC-500 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Download the file named "rc500_sys_v110.zip".
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
When expansion ends, a folder named rc500_sys_v110 and containing the necessary update data appears.

PROCEDURE FOR THE UPDATE

Caution

You must not rename the extracted files.
Never turn off the RC-500's power while the update is in progress. Otherwise the system program or the RC-500 itself may be destroyed.

Please install the extracted system program files into your RC-500 according to the following procedure.

Hold down the [ MENU ] button and [ EXIT ] button, and connect a plug to the OUTPUT A/MONO jack.
Then it will turn on. After a short interval, the message "RC-500 Updater CONNECTING..." appears on the RC-500's display.
Connect the computer to the RC-500's USB port by a USB cable.
A "BOSS RC-500" icon (drive) appears on the computer.
Open the BOSS RC-500 icon.
"Removable Disk (*:)" may appear instead of the BOSS RC-500 icon.
Copy (drag and drop) all the files included in the "rc500_sys_v110" folder into the "BOSS RC-500" icon.
* Do not copy the "rc500_sys_v110" folder.
Disconnect the BOSS RC-500 from the computer.
With Windows
Right-click on the "BOSS RC-500" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
With macOS
Drag the "BOSS RC-500" icon to the Trash icon in the Dock.

When ejection of the USB drive is complete, the message "UPDATE ?" appears on the RC-500's display.
Make sure the message "UPDATE ?" is displayed, then go on to the following step.
Disconnect the USB cable.
Press [ VALUE ] knob to start the update process.
When the update is complete, the message "COMPLETE" appears on the RC-500's display.
Disconnect the plug from the OUTPUT A/MONO jack.
This completes the update operation. The new system program runs at the next startup.
Follow the procedure for verifying the version to verify that the version has been updated.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RC-500 System Program ( Ver.1.10 )

支援

Quick Links