BOSS - 支援 - MS-3 - 更新&驅動程式 - MS-3 System Program (Ver.1.04)

MS-3 System Program (Ver.1.04)

Use MS-3 Editor/Librarian Ver.1.0.1 as a set with MS-3 Ver.1.04.

How to know the version

Before you start, check the system program version of your MS-3.

While holding down [ ENTER ], turn power ON.
Continue to hold down ENTER until the BOSS logo appears on the display.
After a short while, the version information appears on the display.
If this shows the latest version (version 1.04 or later), there's no need to update your MS-3.
After verifying the displayed version, switch off the power.

Update history
[ Ver.1.04 ] NOV 2017

Compatible with the MS-3 Editor/Librarian Ver.1.0.1.

Bug Fixes
The following bugs were fixed.

When the PATCH MIDI parameter of PC, BANK MSB, BANK LSB, CC1 NUM, or CC2 NUM is set to its maximum value, the data in Editor/Librarian goes to "0."
When BNK.CNG (BANK CHANGE MODE) is set to WAIT, bank switching sometimes fails to occur when number switches ([1] + [2] or [3] + [4]) are pressed or an external pedal is depressed.
When a "B0" (bass 5th string open) note is input to B.HARMONIST, the harmony pitch is not correct.

[ Ver.1.03 ] AUG 2017

Additional Function

Support for MS-3 Editor/Librarian Added

Bug Fixes
The following bugs were fixed.

When DELAY TIME is set to notes, the TAP illumination time is incorrect.
When "KNOB ASSIGN = BPM" is in effect, the state when PREF for BPM has been switched using SYSTEM<=>PATCH is sometimes erratic.
The only value that can be selected for PEDAL BEND - PITCH - MIN/MAX using ASSIGN is "0."
After a PATCH CHANGE operation, CTLOUT is sometimes in an unintended state.
At the EFFECT CHAIN screen, if a CTL IN jack is disconnected or when the FS-5L is ON (LED illuminated), EFFECT TYPE is sometimes unselectable.
The internal state of ASSIGN TARGET = MIDI CC# is not reset by a patch change.
When the OUTPUT SELECT value for PREFERENCE is changed, the setting fails to be applied until the power is reset.

Change the specifications

The specifications have been changed so that during continuous INC/DEC of PATCH/BANK by external control, REPEAT is stopped when PATCH MIN/MAX is reached.
The specifications have been changed so that when BPM TAP or DLY TAP is assigned to the MEMORY/MANUAL switch, the indicator flashes in MEMORY MODE as well.
The specifications have been changed so that WAIT can be used when using CTL IN to perform a BANK UP/DOWN operation.

What you will need to update your MS-3

MS-3
USB cable
A computer with a USB connector ( Windows, Mac )

Caution when performing the update

If you update on the normal mode of MS-3 against the correct procedrue, this update data may destroy the system program.
Never power-off your MS-3 while the update is in progress!
If a power failure or similar accident occurs during the update process, the MS-3 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "ms3_sys_v104.zip" file on your computer to get the update files named "MS3ROM.BIN" and "ROMINFO.TXT" in the "ms3_sys_v104" folder.

Procedure for the update

Connect the computer to the MS-3's USB port by a USB cable.
Hold down the octave key [EXIT] button and turn on the power.
* Continue to hold down EXIT until "MS-3 Updater" appears on the display.
Open the "BOSS_MS-3" drive folder in your personal computer.

[ Windows users ]

Within My Computer (or Computer), open "BOSS_MS-3" (or Removable Disk).

[ macOS / OS X users ]

On the desktop, open the "BOSS_MS-3" icon.
Copy (drag and drop) the "MS3ROM.BIN" and the "ROMINFO.TXT" in the "ms3_sys_v103" folder into the root directory of the "BOSS_MS-3" drive.
After the copy has been completed, unmount or remove the drive on your computer.
With Windows

Right-click on the "BOSS_MS-3" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
With macOS / OS X

Drag the "BOSS_MS-3" icon to the Trush icon in the Dock.
Disconnect the USB cable.
The message "Push [ENTER] to start." will appear on the display.
Press [ ENTER ] button to start the update process.
The message "Completed." will appear on the display when the update process completes.
Turn the MS-3 power off.
Please verify the version number "1.04" with the procedure described in "How to tell the version" part of this document.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

MS-3 System Program (Ver.1.04)

支援

Quick Links