BOSS - 支援 - KATANA-100/212 - 更新&驅動程式 - KATANA System Program (Ver.4.00)

KATANA System Program (Ver.4.00)

This "KATANA System Program" is not compatible for KATANA Mk II series.

Use BOSS TONE STUDIO for KATANA Version 3 as a set with KATANA series version 4.

HOW TO TELL THE VERSION

Please check the version of the system working on your KATANA before downloading the archive file.

Turn the POWER switch on while holding down the [ TAP ] button.
If the indicators light up as described below, the system is at the latest version.
- When the [ POWER CONTROL ] switch is adjusted to "0.5W," the indicator for "BOOSTER/MOD" lights up.
If the indicators light up in a different way than just described, perform an update.
When you have finished verifying the version, turn off the power.

* Don't perform the update if the product is already up-to-date.

UPDATE HISTORY

[ Ver.4.00 ] DEC 2019
Katana Version 4 Newly Added Features

Effects expanded to 65 total types; Heavy Octave, Stereo Delay, and Pan Delay added
New Pedal FX section; Wah and Pedal Bend effects can be set up in BOSS Tone Studio
Dedicated mode for using as a slave amp for the Katana Mk II's Stereo Expand feature (except KATANA-50)

[ Ver.3.02 ] JAN 2019
Bug Fixes
The following bugs were fixed.

Popping noise occurs when TONE SETTING is switched.
The SYSTEM parameter set in BOSS TONE STUDIO is initialized when KATANA version 2 is updated to version 3.

[ Ver.3.01 ] DEC 2018
Bug Fix
The following bug was fixed.

The minimum value and maximum value settings of an expression pedal specified by "ASGN" return to their default values when the power is turned off.

[ Ver.3.00 ] DEC 2018
Additional Functions

When using reverb or other stereo effects, USB Audio OUT carries the stereo signal.
"GE-10" was added to TYPE for EQ (PATCH EQ) and GLOBAL EQ.
"95E Pedal Wah" and "Roland DC-30 Analog Chorus-Echo" were added to TYPE for MOD/FX.
It is now possible to assign the parameters you want to the effect knobs on KATANA's top panel.
You can assign parameters to expression pedals with greater flexibility.

[ Ver.2.04 ] JAN 2018 ( Except KATANA-Artist )
Bug Fix
The following bug was fixed.

When the POSITION value for GLOBAL EQ has been set using BOSS TONE STUDIO, the setting is sometimes not correctly applied to the audio.

[ Ver.2.03 ] ( Except KATANA-Artist )
Bug Fixes
The following bugs were fixed.

When switching between BANK A and B using a FS-5U unit connected to the EXP PEDAL jack on the GA-FC, in extremely rare cases, no sound is produced.
When pressing and holding TAP on the GA-FC to switch between setting either the DELAY or DELAY2 delay time, the indicator on the GA-FC sometimes fails to flash.

[ Ver.2.02 ] NOV 2017 ( Except KATANA-Artist )
Bug Fixes
The following bugs were fixed.

When TONE SETTING is set to "PANEL," after using the GA-FC (foot controller) to set respective effects to "OFF" and then again selecting "PANEL," the respective effects return to "ON."
Selecting a TONE SETTING for which EQ is set to "OFF" yields sound for which EQ is set to "ON."
When a MIDI Program Change message and Control Change message are received simultaneously, the Control Change message is not applied.
When the unit is updated to version 2.01, all TONE SETTING Program Change numbers are set to "1." (This occurs when updating from version 1 to version 2.01.)
* Use BOSS TONE STUDIO for KATANA Version 2 to set the Program Change number for each TONE SETTING.
When the unit is updated to version 2.01, the SEND/RETURN values for BANK A and "PANEL" are set to "OFF." (This occurs when updating from version 1 to version 2.01.)
* Use BOSS TONE STUDIO for KATANA Version 2 to set SEND/RETURN to "ON."

[ Ver.2.01 ] OCT 2017 ( Except KATANA-Artist )
Additional Functions
Please refer to the "KATANA Owner's Manual" for detailed information in the [ Owner's Manuals ].
To make settings for added functions, use BOSS TONE STUDIO for KATANA Version 2.

A function to switch between BANK A/B has been added to TONE SETTING.
"LINE OUT AIR FEEL" and "CABINET RESONANCE" were added.
"PHASE 90E" and "FLANGER 117E" were added to TYPE for MOD/FX.
"SDE-3000" was added to DELAY TYPE.
DELAY2, EQ (PATCH EQ), and GLOBAL EQ effect modules were added.
SEND/RETURN is now settable for each individual TONE SETTING value.
Setting the PC and CC numbers received by MIDI is now possible.

[ Ver.1.02 ] OCT 2016 ( Except KATANA-Artist )
Functionality Improvements

Support for BOSS TONE STUDIO for KATANA was added.
Noise when switching effects was reduced.

Bug Fix
The following bug was fixed.

No sound produced immediately after making a USB connection.

WHAT YOU WILL NEED TO UPDATE YOUR KATANA

KATANA
USB cable
* The update is carried out with the unit and the computer connected via USB.
Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the KATANA. This update data may destroy the data or system program of other products.
Never power-off your KATANA while the update is in progress!
If a power failure or similar accident occurs during the update process, the KATANA won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "katana_sys_v400.zip" file on your computer to get the two update files named "ROMINFO.TXT" and "KATANARM.BIN" in the "katana_sys_v400" folder.
Please make sure you have unzipped the downloaded update file.

PROCEDURE FOR THE UPDATE
Caution

You must not rename the extracted files.
Never turn off the KATANA's power while the update is in progress. Otherwise the system program or the KATANA itself may be destroyed.

Please install the extracted system program files into your KATANA according to the following procedure.

Adjust the [ MASTER ] knob to minimum.
* Do not connect the KATANA and the computer yet.
Turn the POWER switch on while holding down both the [ CH1 ] and [ PANEL ] Tone Setting buttons.
The indicators for the [CH1] ~ [CH4] buttons flash.
Connect the computer to the KATANA's USB port by a USB cable.
The indicators for the [CH1] through [CH2]/[CH4] buttons stop flashing and stay lighted, and a "BOSS_KATANA" drive appears on the computer screen.
Open the BOSS_KATANA icon.
"Removable Disk (*:)" may appear instead of the BOSS_KATANA icon.
Copy (drag and drop) all the files included in the "katana_sys_v400" folder into the "BOSS_KATANA" icon.
* Do not copy the "katana_sys_v400" folder.
Disconnect the BOSS_KATANA from the computer.
With Windows

Right-click on the "BOSS_KATANA" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."

With Mac

Drag the "BOSS_KATANA" icon to the Trush icon in the Dock.
Disconnect the USB cable.
The [PANEL] button flashes.
Press [ PANEL ] button to start the update process.
While the update is in progress, the "EFFECTS" indicators light up.
When the update has finished, the "EFFECTS" indicators slowly flash simultaneously.
Turn the KATANA power off.
This completes the update operation. The new system program runs at the next startup.
Follow the procedure for verifying the version to verify that the version has been updated.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

KATANA System Program (Ver.4.00)

支援

Quick Links