BOSS - 支援 - GT-1000CORE - 更新&驅動程式 - GT-1000 Driver Ver.1.1.1 for Windows 10/11

GT-1000 Driver Ver.1.1.1 for Windows 10/11

* It can also be used with GT-1000CORE.

When Using GT-1000 Ver.2.00 or later in Combination with BOSS TONE STUDIO for GT-1000 and the GT-1000 Driver

Use the most up-to-date versions in combination, as described below.

GT-1000 itself

GT-1000 System Program Ver.2.00 or later

BOSS TONE STUDIO for GT-1000

BOSS TONE STUDIO for GT-1000 Ver.2.0.0 for Windows or later

GT-1000 Driver

GT-1000 Driver Ver.1.1.1 for Windows 10/11

Uninstalling the Driver

When GT-1000 Driver Ver.1.0.0 for Windows 10 is installed, first follow the steps below to uninstall the driver.

Disconnect all USB devices, and then start Windows.
* Be sure to also remove the GT-1000's USB cable.
Exit all applications before you begin the uninstallation.
* Please wait for about 10 seconds until these applications exit completely.
Right-click the start button and then click "Apps and Features" or "Programs and Features".
In the list, select GT-1000 Driver, and then click "Uninstall" or "Uninstall/Change".
* The driver is not installed if GT-1000 Driver is not displayed in the list.You do not need to uninstall the driver.
If a message confirming the uninstallation appears, click "Uninstall".
If a dialog box regarding User Account Control appears, click [Yes].
* If you are asked to enter the password for an administrative account, sign in to Windows as a user whose Account Type is Administrator, and then perform the uninstallation.
The display will indicate "The installed GT-1000 Driver will be uninstalled." and click the [OK].
When the message "Uninstallation was completed." is displayed, click [OK] to restart Windows.

DRIVER FOR WINDOWS 10/11

Your computer automatically downloads the Windows 10/11 driver from the Internet when a product requiring the driver is connected to the computer.
Downloading and installing the driver yourself is not necessary.

* Under normal conditions, the driver installation is completed in several minutes. It may take about 10 minutes depending on the Internet connectivity or if there are other drivers being installed for other devices.
* A problem may have occurred if the device is connected but cannot be used after waiting for 10 minutes.

DOWNLOADING THE DRIVER FOR WINDOWS 10/11

If you're using a computer that is not connected to the Internet, or if the driver isn't downloaded automatically, then download the driver for Windows 10/11 manually.
To download it, use the [ DOWNLOAD ] button at the bottom of this page.

The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
The installation method for the driver is described in the README.txt file created after expanding the archive file. Before attempting to install the driver, be sure to read the README.txt file.

ACTION TO TAKE AFTER INSTALLING

For information on what to do after installing the driver, refer to Readme.htm, which is created after installation.

* Please be aware that the information in Readme.htm related to "installing" is based on the case where the driver is automatically downloaded over the Internet.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.

UPDATE HISTORY

[ Ver.1.1.1 ] DEC 2021

Support for Windows(R) 11.
* The driver for Microsoft(R) Windows(R) 10 (32-bit Edition) was not changed. It remains at version 1.1.0.

[ Ver.1.1.0 ] OCT 2018

Compatible with the GT-1000 Ver.1.20 or later.

SYSTEM REQUIREMENTS

Operating System

Microsoft(R) Windows(R) 11: Ver.1.1.1
Microsoft(R) Windows(R) 10 ( 64-bit Edition ): Ver.1.1.1
Microsoft(R) Windows(R) 10 ( 32-bit Edition ): Ver.1.1.0
* Windows 10 Mobile is not supported.

Computer

Windows-compatible PC equipped with USB port
* ARM-based PCs are not supported.
* It cannot be used in a virtual Windows environment.
* Windows running on Mac is not supported.

Other

Internet connection
* The Internet connection is needed to download the driver.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

GT-1000 Driver Ver.1.1.1 for Windows 10/11

支援

Quick Links