BOSS - 支援 - GT-1000CORE - 更新&驅動程式 - GT-1000 Driver Ver.1.0.0 for macOS / OS X

GT-1000 Driver Ver.1.0.0 for macOS / OS X

* It can also be used with GT-1000CORE.

If you have already installed the driver under macOS High Sierra (macOS 10.13), reinstalling the driver is not necessary.
With macOS Mojave (macOS 10.14), the system can be used as-is.

When Using GT-1000 Ver.2.00 or later in Combination with BOSS TONE STUDIO for GT-1000 and the GT-1000 Driver

Use the most up-to-date versions in combination, as described below.

GT-1000 itself

GT-1000 System Program Ver.2.00 or later

BOSS TONE STUDIO for GT-1000

BOSS TONE STUDIO for GT-1000 Ver.2.0.0 for macOS / OS X or later

GT-1000 Driver

GT-1000 Driver Ver.1.0.0 for macOS / OS X

Installing the Driver

The downloaded file is an archive file. Information on how to use it is inside the Readme.htm file created after expanding the downloaded file.
Before installing the driver, be sure to read the Readme.htm(*) file.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.

During driver installation under macOS Mojave (macOS 10.14), the message "for macOS 10.13" or "This is a driver for using ******* on macOS 10.13." might be displayed on the installation screen, but the software can be used without problem on macOS Mojave (macOS 10.14).
* The "*******" portion contains the model name for the driver being installed.

After downloading the driver, follow the installation procedure for the version of macOS that you're using.

macOS High Sierra (macOS 10.13) Driver Installation and Troubleshooting
macOS Mojave (macOS 10.14) Driver Installation and Troubleshooting
* If you're using OS X 10.10, OS X 10.11, or macOS 10.12, refer to the Readme.htm file.

System requirements
This driver has the following requirements.

* Please also check the System requirements for the audio/MIDI application and the operating system you're using.

Operating System

macOS 10.12 / macOS 10.13 / macOS 10.14
OS X 10.10 / OS X 10.11

Computer

Apple Mac series computer with on-board USB

* Even if connected to a USB 3.0 port, the performance of the product will not change.
* Mac computers running Microsoft Windows are not supported.

Apple, Mac OS and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
macOS is trademark of Apple Inc.
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

GT-1000 Driver Ver.1.0.0 for macOS / OS X

支援

Quick Links