BOSS - 支援 - Gigcaster 8 - 更新&驅動程式 - Gigcaster8 GCS-8 System Program (Ver.1.04)

Gigcaster8 GCS-8 System Program (Ver.1.04)

HOW TO TELL THE VERSION

Please check the version of the system working on your GCS-8 before downloading the archive file.

Push [ POWER ] switch. Then it will turn on.
Push [ MENU ] switch of display. Then open MENU screen.
Push [ SETUP ] switch of display. Then open SETUP screen.
Push [ GENERAL ] switch of display. Then open GENERAL screen.
The display indicates the current system version.

UPDATE HISTORY

[ Ver.1.04 ] APR 2023

Additional Functions

Compatible with Gigcaster App.

Bug Fixes

Improved system stability.

WHAT YOU WILL NEED TO UPDATE YOUR GCS-8

GCS-8
USB cable
* The update is carried out with the unit and the computer connected via USB.
* Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0.

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the GCS-8. This update data may destroy the data or system program of other products.
Never power-off your GCS-8 while the update is in progress!
If a power failure or similar accident occurs during the update process, the GCS-8 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "gcs8_sys_v104.zip" file on your computer to get the "gcs8_sys_v104" folder.
Please make sure you have unzipped the downloaded update file.

PROCEDURE FOR THE UPDATE

Caution

You must not rename the extracted file.
Never turn off the GCS-8's power while the update is in progress. Otherwise the system program or the GCS-8 itself may be destroyed.

Please install the extracted system program file into your GCS-8 according to the following procedure.

Hold down the [ MARK ] button, and push [ POWER ] switch. Then it will turn on.
After a short interval, the message "PREPARING..." appears on the display.
Connect the computer by a USB cable.
Once connected, the message "CONNECTED." appears on the display.
A "GCS-8_INT" icon (drive) appears on the computer.
Open the "GCS-8_INT" icon.
Copy (drag and drop) all the files included in the "gcs8_sys_v104" folder into the "GCS-8_INT" icon.
After the copy is complete, eject the "GCS-8_INT" icon(drive) from the computer.
[ With Windows computer ]
Right-click on the "GCS-8_INT" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
[ With Mac computer ]
Drag the "GCS-8_INT" icon to the Trush icon in the Dock.
The message "UPDATE ?" appears on the display.
Press [ REC ] to execute the update.
The message "WRITING..." appears on the display.
When the update is complete, the message "COMPLETE" appears on the display.
Then push [ POWER ] switch to turn off the power.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

Gigcaster8 GCS-8 System Program (Ver.1.04)

支援

Quick Links