BOSS - 支援 - ES-8 - 更新&驅動程式 - ES-8 System Program ( Ver.2.04 )

ES-8 System Program ( Ver.2.04 )

Important

When updating from ES-8 version 2.01 or earlier, the procedure in "Returning to the Factory Settings (Factory Reset)" must be carried out after updating to return settings to their default values.
* When updating from ES-8 version 2.03, the operation in "Returning to the Factory Settings (Factory Reset)" is not necessary. Carry out only the operation in "Step 1: Updating to ES-8 Version 2.04."

HOW TO KNOW THE VERSION

Before you start, check the system program version of your ES-8.

Hold down [EDIT] button and connect the AC adaptor.
The power comes on and the version is displayed on the LCD screen.
* If this shows the latest version (version 2.04 or later), there's no need to update your ES-8.

After verifying the displayed version, switch off the power.

UPDATE HISTORY
[ Ver.2.04 ] JAN 2020

Bug Fix
The following bug was fixed.

At specific LOOP STRUCTURE settings, sound fails to play.

[ Ver.2.03 ] NOV 2019

Bug Fixes
The following bugs were fixed.

Incorrect data is sometimes output from EXT CTL jacks EXP 1 and 2.
When a patch-saving operation (write, copy, or exchange) is performed, in extremely rare cases, the data cannot be saved correctly.

[ Ver.2.01 ] APR 2017

Bug Fix
The following bug was fixed.

The problem of MIDI synchronization wavering when the expression pedal is operated was corrected.

[ Ver.2.00 ] MAR 2017
Please refer to the "ES-8 Version 2 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

Additional Functions

"Separate" Added as an Effect Loop Connection Type
Link Function Added
"Patch MIDI" Added as an Assign Target
Added Patch/System Parameters
Support for ES-8 Editor Added

Functionality Improvement

Loop On/Off Screen (Play Screen) Indications Changed

IMPORTANT NOTES ON UPDATING

ES-8 Ver.2 is not compatible with ES-8 Ver.1 MIDI system exclusive parameters.
For data saved using Bulk Dump, restore this data to the ES-8 before updating, and then carry out the update.

WHAT YOU WILL NEED TO UPDATE YOUR ES-8

ES-8
USB-MIDI interface (Roland UM-ONE mk2, etc.)
Two MIDI Cables
A computer with a USB 2.0 connector ( Windows, Mac )
ES-8 Editor for Windows and UpdSMF ( SMF Player for Windows )
or
ES-8 Editor for macOS / OS X and UpdSMF ( SMF Player for macOS / OS X )

CAUTION WHEN PERFORMING THE UPDATE

If you update on the normal mode of ES-8 against the correct procedrue, this update data may destroy the system program.
Never power-off your ES-8 while the update is in progress!
If a power failure or similar accident occurs during the update process, the ES-8 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "es8_sys_v204.zip" file on your computer to get the update files named "001UPD.mid" and "002APP.mid" in the "es8_sys_v204" folder.

PROCEDURE FOR THE UPDATE

Follow the procedure below to install the extracted system programs onto the ES-8.
* Never power-off the ES-8 while the update is in progress.
* For more information on how to work with ES-8 Editor, go to [Owner's Manuals] and refer to "ES-8 Editor Owner's Manual."

Step 1: Updating to ES-8 Version 2.04

Using a MIDI cable, connect the MIDI OUT connector on the USB-MIDI interface to the MIDI IN connector on the ES-8.
Hold down [DISPLAY/EXIT] button and [RIGHT arrow] button on the ES-8, then connect the AC adaptor.
The message UPd appears on the 7-segment LED display.
On the computer, run UpdSMF.
Set MIDI Out Device to the connected USB-MIDI interface.
Click [ Path ] (click [ Select... ] for Mac) on "UpdSMF" and specify the location where the update file ( 001UPD.mid, 002APP.mid ) is from SMF Path (SMF Folder for Mac). Then, click the [ OK ] button.
Click [ Scan SMF ] (unnecessary for Mac) to check that the update file ( 001UPD.mid, 002APP.mid ) is displayed in the file list.
Click Send.
Sending of the update program starts.
When the message ok appears on the display, the update has finished.
Disconnect the AC adaptor and turn off the power.
Please verify the version number "2.03" with the procedure described in "How to tell the version" part of this document.

* When updating from ES-8 version 2.03, the following operations are not necessary.

Step 2: Saving Settings Using ES-8 Editor's "Librarian" - Saving All Settings of the ES-8 Unit (EXPORT)

Using a MIDI cable, connect the MIDI OUT connector on the USB-MIDI interface to the MIDI IN connector on the ES-8.
Using a MIDI cable, connect the MIDI IN connector on the USB-MIDI interface to the MIDI OUT connector on the ES-8.
After starting ES-8 Editor, click [Option], then select the MIDI interface used by MIDI Device IN and MIDI Device OUT.
Click the [CONNECT] button.
If connections are correct, the editor automatically starts communicating with the ES-8.
Click the [Librarian] button.

Click [EXPORT].
Select the save-destination to specify it.
Click [Save].
The editor communicates with the ES-8 unit, and saves all settings to a file.

Step 3: Operating the ES-8 Version 2.04 Unit to Initialize It - Restoring the Factory Settings (Factory Reset)

Press the [EDIT] button.
Select "UTILITY," and press the [ENTER] button.
Select "Factory Reset."
Specify the range as shown below.
Frm: Sys
To: 99-8
Press the [ENTER] button to execute the operation.

Step 4: Using ES-8 Editor's "Librarian" to Transfer Settings to the ES-8 - Transferring Settings from a Saved File into the ES-8 (IMPORT)

Using a MIDI cable, connect the MIDI OUT connector on the USB-MIDI interface to the MIDI IN connector on the ES-8.
Using a MIDI cable, connect the MIDI IN connector on the USB-MIDI interface to the MIDI OUT connector on the ES-8.
After starting ES-8 Editor, transmission to the ES-8 starts automatically when a normal connection is established.
Click the [Librarian] button.

Click [IMPORT].
Select the file in which the settings are saved.
Click [Open].
A confirmation message appears, informing you that the settings of the ES-8 unit itself will be rewritten.
If it is OK for the settings of the ES-8 unit to be overwritten, click [EXECUTE].
The editor communicates with the ES-8 unit, and all settings saved in the file are sent to the ES-8 unit.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

ES-8 System Program ( Ver.2.04 )

支援

Quick Links