Support

RC-500 System Program ( Ver.1.02 )


HOW TO KNOW THE VERSION
Before you start, check the system program version of your RC-500.
  1. Hold down the [ MENU ] button , and connect a plug to the OUTPUT A/MONO jack. Then it will turn on.
    * Press and hold the [ MENU ] button until "RC-500" appears on the display.
  2. The display indicates the current system version.
  3. Disconnect the plug from the OUTPUT A/MONO jack.

UPDATE HISTORY
[ Ver.1.02 ] OCT 2020
The stability of operation was improved.

WHAT YOU WILL NEED TO UPDATE YOUR RC-500
  • RC-500
  • USB cable
    * The update is carried out with the unit and the computer connected via USB.
    Provide a cable suitable for connection to the computer you're using.
  • Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0.
  • AC Adaptor ( PSA Series : optional)

CAUTION WHEN PERFORMING THE UPDATE
  • Never apply this update data to any product other than the RC-500. This update data may destroy the data or system program of other products.
  • Never power-off your RC-500 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the RC-500 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE
Download the file named "rc500_sys_v102.zip".
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
When expansion ends, a folder named rc500_sys_v102 and containing the necessary update data appears.

PROCEDURE FOR THE UPDATE
Caution
  • You must not rename the extracted files.
  • Never turn off the RC-500's power while the update is in progress. Otherwise the system program or the RC-500 itself may be destroyed.
Please install the extracted system program files into your RC-500 according to the following procedure.
  1. Hold down the [ MENU ] button and [ EXIT ] button, and connect a plug to the OUTPUT A/MONO jack.
    Then it will turn on. After a short interval, the message "RC-500 Updater CONNECTING..." appears on the RC-500's display.
  2. Connect the computer to the RC-500's USB port by a USB cable.
    A "BOSS RC-500" icon (drive) appears on the computer.
  3. Open the BOSS RC-500 icon.
    "Removable Disk (*:)" may appear instead of the BOSS RC-500 icon.
  4. Copy (drag and drop) all the files included in the "rc500_sys_v102" folder into the "BOSS RC-500" icon.
    * Do not copy the "rc500_sys_v102" folder.
  5. Disconnect the BOSS RC-500 from the computer.
    With Windows
    Right-click on the "BOSS RC-500" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
    With macOS
    Drag the "BOSS RC-500" icon to the Trash icon in the Dock.

    When ejection of the USB drive is complete, the message "UPDATE ?" appears on the RC-500's display.
    Make sure the message "UPDATE ?" is displayed, then go on to the following step.
  6. Disconnect the USB cable.
  7. Press [ VALUE ] knob to start the update process.
  8. When the update is complete, the message "COMPLETE" appears on the RC-500's display.
  9. Disconnect the plug from the OUTPUT A/MONO jack.
    This completes the update operation. The new system program runs at the next startup.
    Follow the procedure for verifying the version to verify that the version has been updated.

支援

Quick Links